交流柔性電流傳感器CT6280
結合交流鉗形表用于大直徑和大電流測量
?大直徑測量大型電線和成對電線電流的理想選擇。
?在狹小的空間中?可自由彎曲的CAT IV 300 V CAT III 600 V
CT6280適用于日本日置的CM3289、3280-10F鉗形表
注意:CT6280是用于測量大電流的柔性電流傳感器。它不適用于測量微小電流,例如泄漏電流。
zuida輸入電流:4200 A AC,連續(50 Hz至60 Hz)
直徑:φ130毫米(5.12英寸)(傳感器電纜的橫截面直徑:φ5毫米(0.20英寸);傳感器端蓋直徑:φ7毫米(0.28英寸))
尺寸和質量:42毫米(1.65英寸)寬×65毫米(2.56英寸)高×18毫米(0.71英寸)D(不包括柔性回路和輸出電纜),71克(2.5盎司)
電纜長度:800毫米(31.5英寸)
AC FLEXIBLE CURRENT SENSORC T6280
For large diameter and large current measurement in combination with AC clamp meter
?Large-diameter loop is ideal for measuring large wires and pairs of wires.
?In small spaces
?Freely bendable
CT6280 For the CM3289, 3280-10F and similar products
Note: CT6280 is a flexible current sensor for measuring large currents. It is not suitable for measuring minute current such as leakage current.
Maximum input current | 4200 A AC, continuous (50 Hz to 60 Hz) |
---|---|
Core jaw dia. | φ 130 mm (5.12 in) (Cross-section diameter of sensor cable: φ 5 mm (0.20 in); Sensor-tip cap diameter: φ 7 mm (0.28 in)) |
Dimensions and mass | 42 mm (1.65 in) W × 65 mm (2.56 in) H × 18 mm (0.71 in) D (excluding the flexible loop and output cable), 71 g (2.5 oz) |
Cable length | 800 mm (31.5 in) |